Dialing Mode; Call Waiting/Flash - ClearSounds A600 Manual Del Operador

█ Dialing Mode Setting
Your ClearSounds
touch-tone service. Should you need to change this setting
based on the type of phone service you have, use Tone for
touch-tone service or Pulse for rotary dialing. NOTE: If you
are not sure which dialing mode to select, please contact your
local phone service provider.
1. Press the Menu soft key to display the main menu
list.
2. Press up
then press the Select soft key.
3. Press down
Select soft key.
4. Press up
then press the Save soft key.
█ Call Waiting (Flash)
Your ClearSounds
for Flash Time to Flash-1 (600ms). Flash timing is the
signalling process that tells the phone system when a phone
is on hook or off hook. The United States uses a 600ms
timing sequence. The European Union uses a 300ms timing
sequence. You can select Flash-1 or Flash-2 (300ms). To
change this setting:
1. Press the Menu soft key to display the main menu list.
2. Press up
then press the Select soft key.
3. Press down
the Select soft key.
4. The display shows the current setting. Press up
down
the Save soft key.
A600 comes from the factory preset for
®
or down
to select Dial Mode and then press the
or down
A600 comes from the factory preset
®
or down
to scroll to Flash Time and then press
to select Flash-1 or Flash-2 and then press
27 – ENGLISH
to scroll to BS Settings and
to select Tone or Pulse and
to scroll to BS Settings and
or