Troubleshooting - Magic Chef MCSCWD20W Manual Del Usurio

Troubleshooting Tips
Issue
Unit will not start
Door does not
Open
Heating fault
Water leakage
Water is leaking
from the bottom of
the unit.
Possible Cause
Unit's safety protection
design has been
initiated. The door lock
is engaged.
NTC (temperature
sensor) is damaged and
heating pipe is aging.
Connections are not
tight.
Drain pipe is blocked.
The inlet pipe is not
connected firmly.
Outlet hose has water
leakage or hose is
connected loosely.
Solution
Ensure the door is closed
tightly.
Check if power plug is
inserted.
Check to make sure the
electrical plug has power.
Check if water supply tap is
opened.
Check if [Power] button is
pressed.
Check if [Start/Pause] button
is pressed.
Disconnect Power.
Allow unit to cool down to safe
temperatures.
Can normally wash clothes
but cannot wash with heat.
Contact authorized technician.
Check and tighten all water
pipes and connections.
Clean drain pipe.
Contact authorized technician.
Fix the inlet pipe.
Replace the drain hose.
Contact authorized technician.
26