Aditional Functions; Modbus; Contactid - Cofem CLVR02EXT Manual

8. Aditional functions

8.1. MODBUS

On demand, Control panel CLVR incorporates MODBUS protocol communication under RS485
standard line.
This functionality allows control panel communication with external equipments for fire detection
and fire alarm integration into other building systems (example in figure 13 option 2).
Tables of MODBUS communication for implementing in the system connected with CLVR
control panel must be requested to seller.
Taking advantage of this communication system, it can be implemente dan ON-LINE CLVR
system in a PC (see example of figure 12 option 1). This option requires:
- RS485 conversor to the PC port protocol (normally RS232 or ethernet)
- Installation of a software in a PC (by default, this software contents the required
MODBUS table options for CLVR communication).
From this software "ON-LINE", it is shown the front of the control panel with their indications
being able to act over their buttons.

9.2. CONTACTID

On demand, Control Panel CLVR incorporates a CONTACID module inside the box.
Because of the size of this module, batteries must be sited in other additional box.
Documentation for module configuration must be request to seller.
48
Ctra. de Molins de Rei a Rubí, Km. 8,4 - 08191 RUBÍ (Barcelona) ESPAÑA.
Tlf.: +34 935 862 690 - Fax:+34 936 999 261 - cofem@cofem.com - www.cofem.com
Conventional Fire Detection and Fire Alarm Control Panel
CLVR02EXT
Figura 13 MODBUS Communication
Figura 14 CONTACTID Communication
FIRE PROTECTION MANUFACTURER