Drilling Holes For Piping, Condensed Water Hose And Power Cable - Qlima S 3925 Manual De Instalación

SC3925
SC3932
7.2

Drilling holes for piping, condensed water hose and power cable.

a. Determine the position of the hole according the diagram in Fig. 9. Drill a hole (with a diameter ≥
85 mm for SC 39xx / ≥ 65 mm for S 39xx), directed slightly down in the direction of the outdoor unit;
this will prevent water seeping inside (Fig. 10).
b. Always use a drilling gauge for drilling in metal gratings, metal sheets or similar materials.
4
52
Picture 9