Tools/Materials Required - Emerson EasyHeat TSR31F Instrucciones De Instalación

ILSR application
1 Compression Fitting Assembly 19 mm (¾") NPT
(Base, Grommet, Bushing, Cap, Grommet Plug)
3 Insulated Splice Connectors
1 Pull Cord wire 2 m (6 ½')
1 GFI cord set

Tools/Materials Required

Scissors
Knife
Needle Nose Pliers
Wire Cutters
Heat Gun
Tape Measure
Ruler
TSR31F or SR31J cable
EasyHeat SL3 Thermostat (Optional)
3 Large 15 cm (6") Shrink Tubes, 19 mm (0.75")
3 Medium 51 mm (2") Shrink Tubes, 12 mm (0.5")
1 Small 19 mm (0.75") Shrink Tube, 3 mm (0.125")
1 Small 44 mm (1.75") Shrink Tube, 3 mm (0.125")
Electrical Tape
Crimping Tool
Plumbing Tools and Fittings
Screw Driver - Flat Head with 10 cm (4") Shaft
Recommended
Petroleum Jelly or Wire Pulling Lubricant
Copper Wire 14 AWG (For Dual-Cable Installations)
CFIL (Optional) Compression Fitting Assembly 19 mm
( ¾") NPT (Base, Grommet, Bushing, Cap, Grommet
Plug)1 Small 44 mm (1.75") Shrink Tube, 3 mm (0.125")
www.easyheat.com
2