Table Of Anomaly Signals - Pixsys ATR 902 Manual Instalador

Auxiliary output related to the step
Step 4
Step 3
Step 2
Step 1
OUT
ON
OFF

Table of Anomaly Signals

13
If installation malfunctions, controller switches off regulation output and
reports the anomaly.
For example, controller will report failure of a connected thermocouple

visualizing
 
Error in EEPROM cell
programming.


Incorrect cycle data.

Incorrect confi guration data.

Possible loss of instrument

calibration.
Sensor connected to AI1

broken or temperature out of
 
range.

Missing calibration.

Cold junction sensor failure or
  
room temperature outside of

allowed limits.
Step 5
Cycle end
Step 6
Operator stop
Time
(fl ashing) on display. For other signals see table below:
Cause
ON/OFF status of the auxiliary
output is selectable for each step
of each cycle. The status can be
selected also at cycle end.
Call Assistance.
Riprogrammare il ciclo
Verify that confi guration
parameters are correct.
Control connection with probes
and their integrity.
Call Assistance.
Call Assistance.
How to do
ATR902 - User manual 33