Pulsar TRAIL Manual De Instrucciones página 12

The values (for example, +7.0) shown on the right
=
of the distance values, stand for the number of
clicks along the Y axis, at which the reticle
position at other distances differs from the reticle
position in the primary distance.
To re-zero at any distance, select the desired
=
distance and press briefly the M button.
Zeroing screen which allows the change of
=
zeroing coordinates will appear.
Changing the primary distance.
Select a non-primary distance and enter the
=
submenu for operating the distances with a short
press of the M button.
Select icon
=
Press briefly the M button.
=
Icon
0
=
change of primary distance.
Deleting added distance.
Select the distance you wish to delete and enter
=
the submenu for operating the distances with a
short press of the M button.
Select icon
=
Select "Yes" in the dialog box to delete a distance.
=
"No" – to cancel deletion.
When selecting "Yes" you go to the submenu "list
=
of distances"; "No" – return to the previous screen
"operating the distances".
Attention! If the primary distance is deleted, the
first distance on the list automatically becomes the
new primary distance.
Additional menu for zeroing parameters setup
Having selected a zeroing distance and having
entered the submenu
following:
Windage/Elevation correction
=
Magnification
=
Zeroing with the FREEZE function
=
Edit distance title
=
Additional menu option "Windage/Elevation
correction" allows you to correct the reticle position
as follows:
First select in the submenu "Operating the
=
distances" at which the reticle position needs to
be corrected.
17
- primary distance.
0
next to the selected distance confirms the
"delete distance".
, the display shows the
Select icon
=
For detailed description of the reticle position
=
correction please refer to section 9 "Zeroing".
This submenu allows you to increase the sight's
digital zoom when zeroing which reduced the click
value this improving accuracy of zeroing.
Magnification
Having selected a zeroing distance and having
=
e n t e r e d t h e s u b m e n u , s e l e c t s u b m e n u
"Magnification" with a short press of the M button.
Select the digital zoom value (i.e. 4x) with the UP
=
(3) and DOWN (5) buttons.
Confirm you selection with a short press of the M
=
button.
Function FREEZE is designed to zero your weapon.
The highlight of the function is that, unlike in the
"one shot zeroing" method, you do not need to hold
Freeze
the sight in the aiming point.
Having selected a zeroing distance and having
=
entered the submenu, enter the submenu
FREEZE with a short press of the M button or
press briefly the ON button when in the zeroing
mode.
A screen shot (image freezing) will be made –
=
icon will appear on the display.
For detailed description of the zeroing procedure,
=
please refer to section 9 "Zeroing".
Function "Smart reticle"
When changing the digital zoom, the reticle shown
on the display is scaled, i.e. its external look will be
c h a n g i n g ( b e c o m i n g l a r g e r o r s m a l l e r )
proportionally to the changing zoom. This allows the
use of rangefinding reticles at any digital zoom.
Edit distance title.
This submenu allows you to change the value of the
current distance.
Having selected a zeroing distance and having
=
entered the submenu, enter the submenu "Edit
distance title" with a short press of the M button.
Select values for each digit with the UP (3) and
=
DOWN (5) buttons. Toggle between the digits with
a short press of the M button.
Confirm you selection with a long press of the M
=
button.
with a short press of the M button.
18