Pulsar TRAIL Manual De Instrucciones página 16

Wi-Fi connection
Function "Auto shutdown" (for example 1 min)
Running time
Battery charge level (if the sight is powered by the Battery Pack)
or
External battery power indicator (if the sight is powered by an
external power supply)
or
Battery charge with current level in per cent (if battery is installed or it
is being charged by external power supply)
A
900m 00:02
Note: the image "freezes" on the display during calibration.
15
VIDEO RECORDING AND PHOTOGRAPHY
TRAIL thermal sights feature video recording and photography of the
image being ranged to the internal memory card.
Before using this feature please read the menu options "Date setup",
"Time setup" of the section "Main menu functions".
The built-in recorder operates in two modes:
- Photo (photography; in the top left corner of the display you can see a
photography icon,
If estimated number of photos that can be saved to the Flash card is more
than 100, message «>100». Is shown.
- Video (video recording; in the top left corner of the display you can see a
video icon , current video resolution, total video time left in the
format HH:MM:SS (hours : minutes : seconds)
When switched on, the sight is in the Video mode. Toggle between Video
and Photo modes with a long press of the REC (6) button. Switching is
cyclical (Video-> Photo-> Video...).
Photo mode. Photography
Switch to the Photo mode.
Take a picture with a short press of the REC (6) button. The image
freezes for 0.5 sec and a photo is saved to the internal memory.
25
x1.6
1min 02:50
Video mode. Video recording
Switch to the Video mode with a long press of the REC (6) button.
Start video recording with a short press of the REC button.
Upon start of video recording icon
recording timer in the format MM:SS (minutes : seconds) appear
instead:
Pause and resume recording video with a short press of the REC
button.
Stop recording video with a long press of the REC button.
Video files are saved to the memory card:
- After stopping video / after taking a picture;
- Upon powering the sight off if recording was on;
- When the memory card is overfilled during record message
"Memory full" appears.
Notes:
- you can enter and navigate the menu during video recording;
- recorded videos and photos are saved to the built-in memory card in
the format img_xxx.jpg (photos); video_xxx.avi (videos). xxx –
three-digit counter for videos and photos;
- counter for multimedia files cannot be reset;
- if a file is deleted from the middle of the list, its number is not taken by
another file.
- when the counter is full, a new folder is created – img_xxxx. Where
xxxx is folder counter.
- the maximum duration of a recorded file is seven minutes. After this
time expires a video is recorded into a new file. The number of
recorded files is limited by the capacity of unit's internal memory.
- check regularly the free capacity of the internal memory, move
recorded footage to other storage media to free up space on the
internal memory card;
- graphic data (status bar, icons and other) are not shown in recorded
video/photo files.
16
WI-FI FUNCTION
Your thermal imager features wireless connection option (Wi-Fi) which
links it with external appliances (PC, laptop, smartphone).
Turn on the wireless module the with a long press of the UP (3)
button. Wi-Fi operation is shown in the status bar as follows:
disappears, icon Rec and
26