Pulsar TRAIL Manual De Instrucciones página 14

Wi-Fi – off (default password)
=
Digital zoom - off
=
Colour palette – White Hot
=
Unit of measurement - metric
=
PiP – off
=
Side incline – off
=
Auto shutdown – off
=
* These values are set for all profiles (A, B and C).
Warning: date and time settings, default pixel map
and remote control activation, zeroing coordinates
for all distances are not restored.
This menu option allows you to format your sight's
Flash card or memory card (erase all files from its
memory).
Format
Enter the main menu with a long press of the M (4)
=
button.
Enter the submenu "Settings" with a short press
=
of the M button.
Enter the submenu "Format" with a short press of
=
the M button.
With a short press of the UP and DOWN buttons
=
select "Yes" to format the memory card or "No" to
return to the submenu.
Confirm selection with a short press of the M
=
button.
If "Yes" is selected, display will show "Do you want
=
to format memory card?" and "Yes" and "No"
options. Select "Yes" to format the memory card.
Message «Memory card formatting» means that
=
formatting is in progress.
Upon completion of formatting the message
=
«Formatting completed» is shown.
If "No" is selected, formatting is aborted and you
=
return to the submenu.
This option allows you to activate/deactivate the
side (horizontal) incline of the weapon.
Side incline
Side incline is indicated by "sector" arrows on the
edges of the horizontal line of the reticle. Arrows
show the direction in which you should move your
rifle to eliminate side incline.
21
There are three modes of side incline:
5°-10° - one sector arrow;
10°-20° - two sector arrow;
>20° - three sector arrow.
A side incline of less than 5° is not shown on the
display.
Enter the main menu with a long press of the M (4)
=
button.
Enter the submenu "Side incline" with a short
=
press of the M button.
Select "On" with the UP (3) and DOWN (5)
=
buttons to activate side incline; «Off» to
deactivate.
Confirm your selection with a short press of the M
=
button.
This option allows you to activate automatic
shutdown the sight which recognizes whether your
riflescope is in a shooting position. Automatic
Auto
shutdown is actuated after you move the riflescope
shutdown
relative to the optical axis:
Upwards > 70°; Downwards >70°; Leftwards >30°;
Rightwards >30°
Enter the main menu with a long press of the M (4)
=
button.
Enter the submenu "Auto shutdown" with a short
=
press of the M button.
With the UP (3) and DOWN (5) buttons select the
=
time period (1 min, 3 min, 5 min) upon expiry of
which the sight will automatically shut down.
Select "Off" if you wish to desactive Auto
shutdown.
Confirm your selection with a short press of the M
=
button.
Note: if Auto shutdown is active, the status bar
shows the respective icon
period 1 min.
Before operating the remote control, remember to
activate it as follows:
Enter the main menu with a long press of the M (4)
Remote
=
button.
Controle
Enter the submenu "Settings" with a short press
=
of the M button.
Enter the submenu "Remote control" with a short
=
press of the M button.
and selected time
22