Deep Fryer Switch On With Melting (Where Provided) - Giorik 210FE Manual De Instalacion Y Uso

ENG
In case of using solid grease, pay the utmost attention while it is
melting: FIRE HAZARD!
Where provided, use the MELTING cycle (pre-heating); or manually
thermostat the melting stage until the grease has completely lique-
fied.
To switch on, engage the main switch.
Green
Warning
Orange
Warning
Fig. 8
The green control warning light on indicates that the appliance is
ready for use, while the orange warning light remains on when the
heating elements are warming. As soon as the oil reaches the set
temperature the heating elements are disabled and the warning light
goes out.
When the oil temperature goes below the set value, the heating ele-
ments are automatically reactivated.
Green Orange
Warn ing Warning
Light Light
Fig. 9
The green control warning light on indicates that the appliance is
ready for use, and the orange warning light remains on when the
heating elements are warming. As soon as the oil reaches the set
temperature the heating element are disabled and the orange warn-
ing light goes out.
When the oil temperature goes below the set value, the heating ele-
ments are automatically reactivated.
3.2.1 Deep Fryer switch on with MELTING
ed)
If however the deep fryer is fitted with MELTING device switching
on takes place as follows.
28
After filling the vat/vats, in appliances
WITHOUT SWITCH, switching on occurs by
Light
rotating the knob in the desired temperature
position (fig. 8).
Light
For appliances WITH SWITCH, switching on
is done by rotating the knob in fig. 9 left to
position 1 and the knob in fig. 9 right to the
desired temperature position.
(where provid-