Giorik 210FE Manual De Instalacion Y Uso página 29

Fig. 10
Engage pole switch.
Turn switch knob to position 1 and the display switches on D (fig.
10).
Set temperature using button C to increase it and button E to de-
crease it.
If you wish to bypass preheating function G and directly reach the
set temperature, press button A and hold it for a few seconds until
LED B switches on (in this condition the appliance operates at full
power and the grease pre-melting function is not active).
The display D always indicates the progressive temperature reading,
press button C to know the set value.
Upon reaching the set temperature, a buzzer will indicate that the
machine is ready.
Should you wish to run the preheating "MELT", after pressing button
A, press button G for a few seconds, until LED F comes on. In this
status the fryer operates intermittently until it reaches temperature
of 100°C.
The preheating temperature is automatically maintained.
To switch to cooking temperature it is required to disable the pre-
heating function by pressing key G for a few seconds (until warning
light F goes out).
D
E
C
F
B
G
A
A: START/STOP button
B: live resistors LED
C:
temperature
button
D: digital temperature dis-
play (precision +/- 1°C)
E:
temperature
button and
reached buzzer
edgement
F: MELTING in operation
LED
G: "MELT" button: MELTING
enable/disable
ENG
increase
decrease
temperature
acknowl-
29