MODE PRIORITY (Mobile Phone/lntercom/GPS/MP3 and FM)
EN
Please note that only ONE (1) function or mode can be used or be ACTIVE at any time. Commands to the Raptor-i to switch modes manually or
automatically by incoming mobile or intercom calls will follow the priority set out below:
Mobile phone commands
Highest Priority and will be switched over regardless of your current mode in use.
Intercom commands
Middle Priority. Will be switched over if you are listening to Music, FM Radio or GPS announcements.
GPS Sat-Nav commands
Priority depends on the GPS Sat-Nav device. GPS Sat-Nav models which support mobile phone pairing will be accorded Highest Priority. Please
consult your GPS Sat-Nav user manual.
Music, FM radio
For Music (MP3) and FM radio, it is best to turn OFF one before activating the other. As example, while in Music (MP3) mode and you want to
switch to FM radio, do a quick single press to turn OFF the Music (MP3) first, then do a quick double press to turn ON the FM radio.
You need not do this for incoming mobile or intercom calls as the Music (MP3) or FM radio will be automatically switched out and resume after
you end your mobile phone or intercom conversation.
USING MOBILE PHONE
The mobile phone has the highest priority order amongst all of the available functions. (See "MODE PRIORITY")
Answer Call
When a call comes in, the speaker will emit the mobile phone's ring tone. To answer, simply press and release the call control button. Alternatively,
you may leave it to ring and the auto pick up will answer after approximately 8 secs or 3 rings.
10