Specifications; Care For Your Raptor-I - Vertix Raptor-i Manual De Instrucciones

FM RADIO
Select FM Mode: Press the CALL CONTROL button in quick succession TWICE.
Select Favourite Station: Use the VOL UP or VOL DOWN button to search for the stations you like to listen. A "TOO TOO" sound means you
have reached the end of the FM frequency band. If you were using the VOL UP button, it will loop to the lowest start frequency if you continue to
press VOL UP. While searching, you may encounter stops which could be an FM station or noise. This is normal.
Save a Favourite Station: You can save up to 8 favourite stations. Pressing VOL UP or VOL DOWN using a quick double-press action allows you
to scroll through the 8 favourite memory locations in a looping manner. A beep tone means that it has returned to its start position.
To save your favourite stations, start by selecting an unused favourite memory location using the quick double-press action. Next search for your
station using the VOL UP/DOWN button. When you find a station you like, press the CALL CONTROL button ONCE (within 15 secs). A beep tone
indicates a successful save. Repeat by recalling another memory location. You can save your new favourite station over a previously stored station
you no longer wish to keep.

SPECIFICATIONS

®
Bluetooth compatible: v2.0 Class 1
®
Bluetooth compatible profiles: A2DP/AVRCP/HSP/HFP
Pairing: can recall up to 8 devices
Multipoint connection: up to four devices (e.g. 1 mobile phone + 2 intercom + 1 stereo (A2DP)
Frequency range: 2.4000 ~ 2.4835 GHz
Intercom: 3 users, Full-duplex, up to 800m (2,620ft) with Line-of-Sight
Remote Control Ready
FM Radio: 76-108MHz with 8 favourite station presets

CARE FOR YOUR RAPTOR-i

When you do not use your Raptor-i for an extended period of time, please charge the battery every 3 months to keep the battery in a charged
state.
Do not use any solvents or de-greasers to clean Raptor-i as it may damage the rubber or plastic body. You can clean it with a warm damp sponge
and neutral soap, if required. Remember to cover the USB charging port and headset port before your clean the unit to avoid irreparable water
damage to the electronics inside.
EN
13