EN
•
Secure the trimmer during transport to prevent damage or injury. Clean and
maintenance before storage, use of guards on cutting attachments with
metal blades. Use of cover for metal blades during transport and storage.
Environmental protection
•
Environmental protection should be a priority of considerable importance
when using the machine, for the benefit of both social coexistence and
the environment in which we live. Try not to cause any disturbance to the
surrounding area.
•
Carefully comply with local regulations for the disposal of packaging,
deteriorated parts or any elements with a strong environmental impact;
this waste must not be disposed of as normal waste, it must be separated
and taken to specified waste disposal centres where the material will be
recycled.
•
Carefully comply with local regulations for the disposal of waste materials
after mowing.
•
At the time of decommissioning, do not pollute the environment with the
machine, but hand it over to a disposal centre, in accordance with the local
laws in force.
10
cramer.eu
Troubleshooting
PROBLEM
POSSIBLE CAUSE
String is welded to
itself.
Not enough string
on spool.
String will not ad-
vance when using
the bump-feed head.
String is worn too
short.
String is tangled
on spool.
Grass wraps around
Cutting tall grass
shaft housing and
at ground level
string head.
Battery is not
secure.
Motor fails to start
when switch trigger
is depressed.
Battery is not
charged.
* If the fault is not solved, you must go to your distributor and/or nearest Authorized
Technical Service.
SOLUTION
Replace string.
Install more string. Refer to
string replacement earlier in this
manual.
Pull string while pressing line
release button.
Remove string from spool and re-
wind. Refer to string replacement
earlier in this manual.
Cut tall grass from the top down
to prevent wrapping.
To secure the battery pack, make
sure the latch on bottom of the
battery pack snaps into place.
Charge the battery pack accord-
ing to the instructions included
with your model.