Cookies - Breville Joule Pro Manual De Instrucciones

7. Place food, positioned on the included pizza
pan if using, on the center of the wire rack
so air will flow around all sides of the food.
Close the oven door.
8. After the PREHEATING alert has sounded,
the timer will automatically begin to count
down. The temperature and time can be
adjusted during the PIZZA cycle by turning
the corresponding TEMPERATURE and
TIME dial. The cycle can be stopped at any
time by pressing the START/STOP button.
9. At the end of the PIZZA cycle, the oven
alert will sound. The START/STOP button
backlight will go out and the LCD screen
will illuminate white.
NOTE
If using the included pizza pan, place it in the
oven during the preheating cycle for the best
result. Carefully place pizza on the heated pizza
pan.
A NOTE ON PIZZA STONES
When using a pizza stone, it is necessary to
preheat the stone, without a pizza, for optimum
results.
1. Insert the wire rack into rack position 7.
2. Place pizza stone on the center of the wire
rack so air will flow around all sides of the
stone.
3. Close the door.
4. Turn the CONFIRM dial until the indicator
on the LCD screen reaches the PIZZA
function. The top figure on the LCD screen
indicates the preset PIZZA temperature of
'400°F', while the bottom figure indicates
the preset time of '16:00 MIN/SEC'. The
preset CONVECTION and FROZEN
settings will also be displayed.
5. Press the START/STOP button to activate
the PIZZA function. The button backlight
will illuminate red, the oven alert will sound,
and the LCD screen will illuminate orange.
The LCD screen will indicate a blinking
'PREHEATING'.
6. Once the oven has finished preheating, an
alert will sound.
7. After the PREHEATING alert has sounded,
the timer will automatically begin to count
down.
8. At the end of the cycle, the oven alert will
sound. The START/STOP button backlight
will go out and the LCD screen will
illuminate white.
9. Open the oven door and carefully place
pizza on the heated pizza stone.
10. Select desired PIZZA temperature, time,
convection, and fresh/frozen settings and
press the START/STOP button to restart
the PIZZA cycle.
COOKIES FUNCTION
The COOKIES function is ideal for baking
homemade or commercially prepared cookies
and other baked treats.
1. Insert the wire rack into rack position 6.
2. Close the oven door.
3. Turn the CONFIRM dial until the indicator
on the LCD screen reaches the COOKIES
function. The top figure on the LCD screen
indicates the preset COOKIES temperature
of '325°F', while the bottom figure indicates
the preset time of '11:00 MIN/SEC'. The
preset CONVECTION setting will also be
displayed.
4. The COOKIES temperature, time,
convection and frozen settings can be
adjusted before or during the cookie cycle.
23