Dehydrate - Breville Joule Pro Manual De Instrucciones

4. Turn the CONFIRM dial until the indicator
on the LCD screen reaches the WARM
function. The top figure on the LCD
screen indicates the preset temperature of
'160°F', while the bottom figure indicates
the preset time of '1:00 HR/MIN'. The
preset CONVECTION setting will also be
displayed.
5. The temperature, time and convection
settings can be adjusted before or during
the warming cycle.
a) The warming temperature is displayed
as the top figure on the LCD screen.
Turn the TEMPERATURE dial to adjust
the temperature from 110°F/45°C to a
maximum of 480°F/250°C.
b) Turn the TIME dial to select the cooking
time. Maximum cooking times can be set
as follows:
Maximum Temperature is
250°F
210°F/100°C - 250°F/150°C
<210°F/100°C
6. Press the START/STOP button to activate
the KEEP WARM function. The button
backlight will illuminate red, the oven
alert will sound, and the LCD screen will
illuminate orange.
7. The timer will be displayed and
automatically begin to count down. The
temperature and time can be adjusted
during the warming cycle by turning the
corresponding TEMPERATURE and TIME
dial. The cycle can be stopped at any time
by pressing the START/STOP button.
up to 12 hours
up to 72 hours
8. At the end of the KEEP WARM cycle, the
oven alert will sound. The START/STOP
button backlight will go out and the LCD
screen will illuminate white.
DEHYDRATE FUNCTION
The DEHYDRATE function combines low and
stable heat with maximized airflow to evenly
dry out foods without cooking or overheating.
1. Arrange food evenly on the included air
fry/dehydrate basket. For best results,
place food in a single layer and leave space
between pieces. Insert air fry/dehydrate
basket into rack position 3.
2. Close the oven door.
3. Turn the CONFIRM dial until the
indicator on the LCD screen reaches the
DEHYDRATE function. The top figure
on the LCD screen indicates the preset
DEHYDRATE temperature of '125°F',
while the bottom figure indicates the
preset time of '12:00HR/MIN'. The preset
SUPER CONVECTION setting will also be
displayed.
4. The dehydrating temperature, time and
convection settings can be adjusted before
or during the dehydrate cycle.
a) The dehydrating temperature is displayed
as the top figure on the LCD screen. Turn
the TEMPERATURE dial to adjust the
dehydrating temperature from '85°F/30°C
to a maximum of 180°F/80°C'.
b) The time is displayed as the bottom figure
on the LCD screen. Turn the TIME dial to
adjust the time up to 72 hours.
27