MSA PREMAIRE CADET Instrucciones página 10

Installing the Firehawk Regulator
DO NOT use a slide-to-connect regulator with an
Advantage 4000 Facepiece. Failure to follow
this warning can result in serious personal injury or
death.
1. Grasp regulator and orient regulator so that slide but-
ton is on top.
2. Slide regulator onto rail (fast track) of facepiece cover.
Slide regulator down the rail cover until regulator
stops.
3. Insert regulator into facepiece adapter by pushing
inward.
4. Listen for the button to "click" as the regulator locks
into the facepiece.
5. Check proper engagement by pulling on the regulator
to ensure regulator is securely attached to facepiece.
DO NOT use the respirator unless the regulator is con-
nected properly. A regulator that is not installed cor-
rectly can separate from the facepiece unexpectedly.
Return the respirator to an MSA trained or certified
repairperson to correct the condition. Failure to follow
this warning can result in serious personal injury or
death.
TAL 706 (L) Rev. 8 - 800810
WARNING
WARNING
DONNING
6. Inhale sharply to start the airflow.
If the apparatus passes all tests, the PremAire is ready
to use. Remember, you must make these tests every
time before you enter the hazardous atmosphere. If
the unit fails to meet any of these tests, the condition
(s) must be corrected before using the apparatus.
Failure to follow this warning can result in serious per-
sonal injury or death.
Note: If using the PremAire CADET Respirator with any of
the following options, see the sections indicated for prop-
er instructions for use.
See PremAire Duo-Twin Instruction Manual for Air
Tightness Test for Duo-Twin facepiece
(P/N 818370).
Note: If a decontamination procedure, created by a certi-
fied health and/or safety professional, has been estab-
lished for the application in which this respirator is used,
that procedure should take precedence.
10
WARNING