Figure 1 Optional Mounting Flange; Figure 2 Flange Base - Federal Signal Spire 200 Instrucciones De Instalación Y Mantenimiento

To remove the beacon from the flange:
1. Use a flat-tipped screwdriver to push the detent while
turning the beacon counterclockwise.
2. Pull up when the detent is free of the notch.
If desired, permanently lock the flange to the base using the
three #8 screws provided. See Figure 2.
Spire 200 Beacon
™
Federal Signal www.fedsig.com
Installation and Maintenance Instructions

Figure 1 Optional Mounting Flange

Figure 2 Flange Base

9