Brinkmann 810-6680-S Manual Del Propietário página 25

Non Locking
Swivel Caster
Locking
Swivel Caster
Non Swivel
Locking Caster
Front
Back
Bolt
Washer
Spring
Non Swivel
Caster
Step 1
Step 2
Step 3
Step 4
Step 5
Choose a good, cleared assembly
area and get a friend to help
you put your grill together. Lay
card board down to protect grill
fi nish and assembly area.
Some parts may have
CAUTION:
sharp edges. Wear
protective gloves if
necessary.
Attach casters to the bottom of
cart base using eight M6 X 12
mm bolts (black) and eight M6
star washers (black) as illustrated.
Caster Tightening Pin
Note: Insert the caster tightening
pin in each caster so caster
can be tightened.
Remove the spring, washer, and
bolt from the tank gauge bracket.
Set aside for use in Step 5.
Attach the tank gauge needle
assembly to the base and bracket
and secure with a hinge pin and a
cotter pin as illustrated.
Turn cart base right side up.
Attach the tank holder to cart base
using four M6 X 12 mm (black) as
illustrated.
Slide the spring, from Step 2 onto
the tank gauge bracket post. Then
align the tank holder with the post
and secure with the washer and bolt
from Step 2.
24