Power Button; Setting The Date And Time - smartheart 01-554 Manual De Instrucciones

SETTING DATE/ TIME
IT IS NECESSARY TO SET THE DATE AND TIME FOR THE
UNIT EVERY TIME BATTERIES ARE INITIALLY INSTALLED OR
REPLACED
The date/time feature is on the top of the display screen. This unit stores the date
and time, including year allowing for a date/time stamp on all readings in the
memory recall function.
1. When the batteries are first installed, the device will automatically prompt you to set the
Date/Time feature.*
*NOTE: If the batteries have already been installed—when the unit is off (a blank
display screen), press and release the MEMORY & POWER button for 3-5 seconds to
make the unit go into clock setting mode.
Military/ Standard Clock- When you first enter into the clock setting mode you have
2.
the option to choose between a 24 or 12 hour clock. Press the M button to toggle
between the two settings. Once a selection is made press the POWER button to advance
to the next step.
YEAR—next the year will flash on the display. Press the M button to advance the display
3.
to the desired year, press the POWER button to confirm your selection and advance to
the date settings.
10 • ENGLISH
The M and POWER buttons are located
below the display.
M
-Memory button

-POWER button