CARE AND MAINTENANCE
Cuff Care and Maintenance
•
The cuff may be spot cleaned with a mild-detergent as needed
•
To disinfect the cuff, wipe the inside (skin contact side) of the cuff using a cloth
lightly moistened with 70% - 90% ethyl rubbing alcohol and allow to air dry;
it is suggested to disinfect the cuff frequently when used in clinical settings or if
the cuff is contaminated in any way
•
Never attempt to iron or dry the cuff; if the cuff becomes wet, allow the cuff to
air dry completely before use or storage
•
Do not attempt to remove the tube and bladder from the nylon cuff as this may
damage the cuff
•
Take care not to forcefully bend or kink the tubing during storage
•
It is recommended the performance should be checked every 2 years or after
a repair. Please contact customer care at 866-326-1313.
•
It is recommended to clean the cuff every 200 uses.
•
The monitor can maintain the safety and performance characteristics for
minimum of 10,000 measurements of three years
•
The cuff integrity is maintained after 1,000 open- close cycles of the closure
ENGLISH • 21