Troubleshooting And Error Codes - smartheart 01-554 Manual De Instrucciones

TROUBLESHOOTING
Problem
Display shows an
abnormal result
Display is blank when
power is on
No response when
POWER
is pressed
or when new batteries
have been loaded
Monitor keeps re-
inflating
24 • ENGLISH
Possible Cause
Cuff position was not correct or was
not tight enough
Body posture was not correct during
measurement
Speaking, excessive movement, angry,
excited or nervous anxiety during
measurement
Batteries may be expired or installed
improperly
Incorrect operation; possible strong
electromagnetic interference
The battery is low.
Circuit is locked.
Solution
Apply the cuff properly and attempt a new
measurement
Review the 'Taking a Measurement' portion of
this manual and attempt a new measurement
Wait a period of time and attempt a new
measurement after calm has returned; do not
speak or move during measurement
Check the polarity of the batteries and reinstall if
necessary; replace batteries with new batteries
Remove batteries and wait a minimum of five
minutes; reinstall batteries and attempt a new
measurement
Replace the batteries
Remove and reinsert the batteries;
attempt new measurement