Cleaning Instructions; External Surfaces Of The Spirometer - Vyaire SpiroUSB Manual De Funcionamiento

Cleaning Instructions

Disinfection of contaminated parts is only effective after having
them carefully pre-cleaned. Vyaire recommend the tested solution
of PeraSafe disinfectant powder (36-SSC5000A) for pre-cleaning
and disinfection. If a different solution is used, please follow the
given manufacturer's instructions.
The device must not be exposed to solvents e.g. alcohol, chloride
CAUTION: Unplug your SpiroUSB before cleaning.

External Surfaces of the Spirometer

CAUTION: Do not attempt to wash or immerse the SpiroUSB
transducer housing in water or cleaning fluid, as there are
electronic components inside that will be permanently damaged
The external housing of the spirometer may be wiped with sterile
wipes or a damp cloth that has been immersed in a cold sterilising
solution when required.
23