Installing Spcs; Installing Spirousb Device Driver; Compatibility Status; Driver Installation - Vyaire SpiroUSB Manual De Funcionamiento

Installing SPCS

SPCS is supplied on CD ROM with your SpiroUSB. Install SPCS
according to the instructions in the SPCS manual.

Installing SpiroUSB device driver

The driver enables Vyaire USB devices to work with USB enabled
PC software on Windows based machines.
Compatibility status
There are two versions of the USB driver. The driver used depends
on the Operating System you are using. There is a driver for
Windows 32 bit Operating Systems and for 64 bit.
The following operating systems are supported:
• Windows 7 32-bit and 64-bit Operating System
• Windows 8.1 64-bit Operating System
• Windows 10 64-bit Operating System
The driver will not be supported under older Windows Operating
Systems.

Driver installation

If software is installed that provides support for USB, the drivers
may be pre-installed, allowing automatic installation of the drivers
when the device is connected to the USB port. If the device does
not install automatically, download the driver and install the
device manually. The driver can be downloaded from the following
homepage:
www.vyaire.co.uk/our-products/respiratory-care/cardio-
pulmonary-diagnostics/pulmonary-function-testing/spirometers/
spirometry-software-and-firmware-downloads
48