EN
44
AUX IN
1.
Use a connection lead to connect a portable audio player etc. to the
AUDIO IN socket (27). When using video equipment, connect the audio
output to this unit and the video output to a television.
2. Press the
STANDBY button (2) on the main unit or (1) on the remote
control to turn the power on.
3. Press the FUNCTION button (2) repeatedly on the main unit or the
MODE button (7) on the remote control to select the AUX IN function.
4. Play the connected equipment. If volume level of the connected device
is too high, sound distortion may occur. Should this happen, lower the
volume of the connected device. If volume level is too low, increase the
volume of the connected device.
NOTE: To prevent noise interference, place the unit away from the
television.
USING HEADPHONES
(Not included!)
Inserting the plug of your headphones into the system's PHONE JACK (28)
will enable you to listen to CDs, the radio or other music sources in private.
When using headphones, the speakers will be automatically disconnected.
Use the VOLUME +/- buttons (17/18) on the main unit or (4/11) on the remote
control to adjust the volume.