Horizon Fitness HT5.0 Manual Del Usuario página 6

A Open HARDWARE FOR STEP 3.
3
B Connect the CONSOLE WIRES (9) and carefully
tuck them into the console mast.
C Attach HANDLEBAR ASSEMBLY (10) to the CONSOLE MAST
(11) using 2 BOLTS (L), 2 SPRING WASHERS (B) and 2 ARC
WASHERS (M) from the front and 2 BOLTS (N), 2 SPRING
WASHERS (B) and 2 FLAT WASHERS (O) from the sides.
Note: Be careful not to pinch wires while attaching the mast.
Hardware For Step 3
Description
L Bolt (45 mm)
B Spring Washer
M Arc Washer
N Bolt (20 mm)
O Flat Washer
6
Qty
2
4
2
2
2
N
B
O
A Open HARDWARE FOR STEP 4.
4
B Attach UPPER HANDLEBARS (12) to the CONSOLE
MAST (11) using 8 BOLTS (N), 8 SPRING
WASHERS (B) and 8 FLAT WASHERS (O).
C Connect the CONSOLE WIRES (9) and carefully
tuck them into the console mast.
D Attach the CONSOLE (13) using 4 SCREWS (P).
E Attach CRANK ARM CAPS (129).
Note: Be careful not to pinch wires while attaching the console.
Hardware For Step 4
Description
L
N Bolt (20 mm)
B Spring Washer
O Flat Washer
B
P Screw
129 Crank Arm Caps
M
10
9
11
Qty
8
8
8
4
2
13
9
P
11
ASSEMBLY COMPLETE!
12
O B N
129