Maintenance; General; Setting The Guide Play; Ec Declaration Of Conformity - Proxxon PD 230/E Manual Del Usuario

5. Check that the work piece is positioned in the steady free
of play and re-tighten clamp screws 1.

Maintenance

Important
Disconnect mains power before cleaning and maintaining
unit. Do not use compressed air when cleaning.

General

1. After use, thoroughly clean all chips from the machine
using a brush or hand brush.
2. Lubricate or oil all parts according to lubrication diagram
(Fig. 26).
A = oil / lubricate before use
B = oil / lubricate once a month

Setting the guide play

Regular lubrication of the guides does not prevent evidence of
play in the guides after a certain amount of time.
1. Release adjustment screw lock nuts 1 (Fig. 27) for the
radial facing slide, screw in all adjustment screws evenly
until play is eliminated and re-tighten the lock nuts.
2. Release adjustment screw lock nuts 2 for the longitudinal
facing slide, screw in all adjustment screws evenly until
play is eliminated and re-tighten the lock nuts.
3. Turn over the machine and slightly unscrew the set screw
2 (Fig. 28).
4. Re-tighten clamp screws 1 loosely.
Note:
Important
Then check whether the support can still be pushed easily.
Adjust play in handwheel.
1. Release cap nut.
2. Reset handwheel.
3. Re-tighten cap nut.
Disposal:
Please do not dispose of the device in domestic waste! The
device contains valuable substances that can be recycled. If
you have any questions about this, please contact your local
waste management enterprise or other corresponding munici-
pal facilities.

EC Declaration of Conformity

We declare and assume sole responsibility or ensuring that
this Product corresponds with the following EC guidelines:
• EC-Low Voltage guideline 73/23/EC
• DIN EN 61029-1 / 12.2003
• EC-Machine guideline 98/037/EC
• DIN EN 61029-1 / 12.2003
• EC-EMI guideline 89/336/EC
• DIN EN 55014-1 / 09.2003
• DIN EN 55014-2 / 08.2002
• DIN EN 61000-3-2 / 09.2005
• DIN EN 61000-3-3 / 05.2002
Datum: 10.08.2006
Dipl.-Ing. Jörg Wagner
PROXXON S.A.
Department for Equipment Safety
- 25 -