CST/BERGER XP5 Manual De Instrucciones página 5

ALWAYS turn the laser tool "OFF" when not in use. Leaving the laser tool "ON" increases the risk of
someone inadvertently staring into the laser beam.
DO NOT operate the laser tool in combustible areas such as in the presence of flammable liquids,
gases or dust.
ALWAYS position the laser tool securely. Damage to the laser tool and/or serious injury to the user
could result if the laser tool falls.
ALWAYS use only the accessories that are recommended by the manufacturer of your laser tool.
Use of accessories that have been designed for use with other laser tools could result in
serious injury.
DO NOT use this laser tool for any purpose other than those outlined in this manual. This could
result in serious injury.
DO NOT leave laser tool "ON" unattended in any operating mode.
ALWAYS repair and servicing must be performed by a qualified repair facility. Repairs performed
by unqualified personnel could result in serious injury.
DO NOT disassemble the laser tool. There are no user serviceable parts inside. Disassembling the
laser will void all warranties on the product. Do not modify the product in any way. Modifying the
laser tool may result in hazardous laser radiation exposure.
ELECTRICAL SAFETY PROCEDURES
WARNING: Batteries can explode or leak, and can cause injury or fire. To reduce this risk:
ALWAYS follow all instructions and warnings on the battery label and package.
DO NOT short any battery terminals.
DO NOT charge alkaline batteries.
DO NOT mix old and new batteries. Replace all of them at the same time with new
batteries of the same brand and type.
DO NOT mix battery chemistries.
DISPOSE of batteries per local code.
DO NOT dispose of batteries in fire.
KEEP batteries out of reach of children.
REMOVE batteries if the device will not be used for several months.
XP5 • 5