CST/BERGER XP5 Manual De Instrucciones página 6

Ocultar thumbs Ver también para XP5:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 11
CERTIFICATIONS
This laser complies with all applicable portions of title 21 of the Code of Federal
Regulations set by the Food and Drug Administrations, Center for Devices, and
Radiological Health. Complies with 21CFR 1040.10 and 10040.11 except for devations pursuant to
Laser notice No. 50, dated July 26, 2001.
This Laser tool has also been tested and complies with the CE certification requirements set forth
in the EC regulations 89/336/EEC and EN 61000-6-1 (EN50082-1), EN 61000-6-3 (EN50081-1)
and EN 60825-1.
FEATURES (Fig. 1)
1. On/Off Switch
The ON/OFF switch turns the power on and off.
Press Once: Projects Plumb Up, Plumb Down, and three horizontals.
2. Low Battery / ±5º Out of Level LED Indicator
The LED will blink Green to indicate low battery power. When the LED initially indicates low bat-
tery there is approximately 2 hours of battery life remaining. If the LED appears solid red, just
move laser to a more level position.
3. Battery Compartment–
Average life of the 3 "AA" batteries is 15+ hours of intermittent use. It is always a good idea to put
extra batteries in the carrying case.
4. Tripod Mount– 1/4-20
Easily mounts to 1/4-20 thread tripod for versatility.
5. Five Self-Leveling Laser Diodes-±5°
Five laser diodes one plumb up, one plumb down, and three horizontal beams
ACCESSORIES
Universal Mount–
1. Magnets for attachment to steel objects
2. Slots to attach mounting strap vertically or horizontally
3. 1/4 - 20 or 5/8 -11 threads for tripod
By sliding the Universal Mount back, you can expose the bottom beam to transfer down
plumb points.
Once the Universal Mount is attached to the bottom of the unit, the unit can be mounted on a 1/4 -
20 thread camera tripod, a 5/8 - 11 surveyor's tripod or attached to any ferrous metal surface (such
6 • XP5

Publicidad

Tabla de contenido
loading

Tabla de contenido