Transport And Moving; Removing The Packaging; Disposal Of The Packaging - Prebena PKT-fillmaster 350 Instrucciones De Manejo Y Mantenimiento

Compresor de alta presión
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

2.

TRANSPORT AND MOVING

2.1.

Removing the packaging

Take care not to hit any persons or objects with the packaging during handling,
even if it is not particularly heavy. No special equipment is required for moving
the packaging.
Wearing protective gloves, cut through the strapping using scissors and lift the compressor
by hand or using lifting gear with a suitable load--bearing capacity and lower it onto the work-
ing surface.
The crankcase is already filled with lubricating oil ! Do not tilt the compressor!
Note the enclosed add--on parts and check the compressor for intact condition.
2.2.

Disposal of the packaging

The packaging material should be kept at a suitable location on site for possible future trans-
port or at least for the duration of the warranty period. This makes shipping to the service
centre easier if required. Later, please dispose of the packaging in accordance with the appli-
cable regulations.
7

Publicidad

Tabla de contenido
loading

Tabla de contenido