Cleaning Routes - Amibot aNIMAL xl Manual De Usuario

EN
Operating the appliance
You can schedule several cleaning times by repeating the operation
as many times as necessary (you can schedule up to 7 days).
Press the AUTO button to validate the week's schedule (Figure 3).
The robot will start its cleaning cycle as scheduled.
To cancel a schedule, go back to the scheduling settings. To do so,
press the CLOCK button. You will hear a beep and a clock symbol and
"MON" will flash on the display screen. Press on the Mapping Mode
button to reset the scheduled time to 0 (Figure 4). Press this button
again to see the most recent settings. Repeat the same process for
all scheduled times.
NOTES:
• If no action is performed for more than 15 seconds when setting a scheduled
cleaning time, the robot leaves the setting mode.
• Press the AUTO button to confirm the scheduled cleaning time or it will not be
set.
• For scheduled cleaning, the robot must be on its home base. If the robot is
plugged in via its power cable, it cannot start a scheduled cleaning cycle.

Cleaning routes

The robot has 6 cleaning modes. These modes can be selected
using the Remote Control. You can also select the following 4 modes
directly using the buttons on the robot: AUTO, Mapping, SPOT and
HOME.
NOTE: The robot can be manually guided using the arrow buttons. This function is
only accessible when the robot is paused.
18