JUKI M92 Instrucciones Suplementarias Para La Instalacion Y El Uso página 10

Ⅰ . SPECIFICATIONS
The specifications given in the table below are those for the control box (SC-920).
The compact motor unit (M92) can be commonly used with any type of the control box.
Supply voltage Single phase 100 to 120V
Frequency 50Hz/60Hz
Operating Te m p e r a t u r e : 0 t o 4 0 ˚ C
environment Humidity : 90% or less
Input 320VA
The aforementioned power consumption is a reference value when the DDL-8700 is used as the machine
head.
Ⅱ . SET-UP
M92 Compact motor unit (separately available)
1. Installing the pedal unit
3-phase 200 to 240V
50Hz/60Hz
Te m p e r a t u r e : 0 t o 4 0 ˚ C
Humidity : 90% or less
320VA
To use the compact motor unit, the pedal unit has to
be installed on the compact motor unit before install-
ing the motor unit on the table.
Install the pedal unit on the motor unit following the
instructions described below:
Temporarily install the pedal unit supplied with the
❶
control box on the M92 compact motor unit with two
screws ❶ which are also supplied with the control
box. (It is necessary to adjust the location of screws
when installing the motor on the table.)
– 1 –
Single phase 220 to 240V
50Hz/60Hz
Te m p e r a t u r e : 0 t o 4 0 ˚ C
Humidity : 90% or less
320VA