Answering A Call - ClearSounds A300 Manual De Uso

█ Using the Phone Hands-Free Headset Jack
Your phone is equipped with a Phone Headset jack (located on
the left side of the handset), providing flexibility and multi-
functionality. This jack is amplified, allowing you to adjust
both the volume the same as you would through the handset
or speakerphone.
By using this jack, you can listen and speak through your hands-
free headset. This 2.5mm phone headset jack accommodates a
variety of optional hands-free accessories including neckloops,
headphones, silhouettes, and cellular accessories.
NOTE: When a 2.5mm audio device is plugged in, the incoming
audio signal to the handset will now be transferred to the
headset jack. No output on the handset will be heard. As soon
as you plug your headset into the jack, it will be activated.
█

Answering a Call

Handset out of the base
1. To answer a call, press
2. Adjust your volume setting if needed.
3. To end the call, press
base.
Handset in the base
1. If you have activated the Auto Answer function (see
page 28), simply lift the handset out of the base and
speak into the handset.
2. If you have not activated the Auto Answer function, lift
the handset out of the base and press
into the handset.
3. Adjust your volume setting if needed.
4. To end the call, press
base.
After you hang up, the LCD will display the call duration.
and speak into the handset.
or replace the handset to the
or replace the handset to the
21 – ENGLISH
and speak