Technical Data; Environmental Information - ANSMANN 254PD Manual De Instrucciones

With the huge number of different PD end-devices and their soft-
ƒ
ware/ firmware versions, it is possible that the function is not
detected or that it is not fully or flawlessly supported.
End-devices whose original chargers require more than 45W of
ƒ
rated output power will charge slower with this charger.
WARNING
It is important that all end-devices to be charged with the USB PD
ƒ
charger are suitable for the PD protocol.
Ensure that your end-device (smartphone, tablet, notebook,
ƒ
console or other applications) is suitable for one of the output
voltages 5V/9V/12V/15V/20V.
CARE
Disconnect the device from the mains before cleaning or before
storing for an extended period of time.
Clean the charger only with a dry, soft cloth.

TECHNICAL DATA

1. Input:
2. Output:
3. Max. output power:
4. Max. outside temperature: 0°C...30°C

ENVIRONMENTAL INFORMATION

The device should not be discarded in the normal household waste
under any circumstances. Dispose of the device via an authorised
disposal centre or your communal waste disposal facility. Observe the
current applicable regulations. Contact your waste disposal facility
in the event of any doubt. Dispose of all packaging materials via an
environmentally friendly disposal facility.
Deutsch |
Svenska | Italiano | Nederlands | Suomi | Norsk | Dansk
AC110-240V | 50-60Hz | max. 1.3A
USB-A: 5V/2.4A
USB Type-C (PD):
5V/3A
9V/3A
12V/3A
15V/3A
20V/3A
60W (PD)
English | Français | Español | Português