Technical Data; Environmental Information - ANSMANN WILINE 10 Manual Del Usuario

NOTE
LED display
Illuminates white
Illuminates white, then off Fully charged
Flashes white
Standby
INFORMATION
Protective cases with metallic parts or magnets must be removed
ƒ
when charging.
Do not place any foreign objects between the charger and the
ƒ
end-device (no coins, paper clips, metal objects, door keys, NFC
cards, etc.).
Do not use PC / USB-A output ports or a USB mains adapter with
ƒ
too low a power rating to charge the end-device with the WiLine
10 as this will make the charge process too slow or prevent it.
CARE
Disconnect the device from the mains before cleaning or before
storing for an extended period of time.
Clean the charger only with a dry, soft cloth.

TECHNICAL DATA

1. Input:
2. Output:
3. Max. output power:
4. Max. outside temperature: 0 °C ... 30 °C

ENVIRONMENTAL INFORMATION

The device should not be discarded in the normal household waste
under any circumstances. Dispose of the device via an authorised
disposal centre or your communal waste disposal facility. Observe the
current applicable regulations. Contact your waste disposal facility
in the event of any doubt. Dispose of all packaging materials via an
environmentally friendly disposal facility.
Deutsch |
Svenska | Italiano | Nederlands | Suomi | Norsk | Dansk
Charging
Fault detection
OFF
5 V DC = 2 A
9 V DC = 1.67 A
5 V DC = 1 A
9 V DC = 1.2 A
10 W
English
| Français | Español | Português