Removing The Eps Module From The Standard Seat - RECARO C 6000 Manual Del Usaurio

Warning!
Ensure that you neither exceed nor fall short of the torque listed above.
If the torque is insufficient, the screws will work loose whilst you are driving. The thread might be
damaged if the torque is too high. The risk of an accident and being injured whilst driving exists in
both cases.
The vehicle must be stopped immediately if a screw works loose and the screws must be replaced
by new screws or with the bolt adhesive and tightened to the stipulated torque.

3.8 Removing the EPS module from the standard seat

O
1
1. Remove the cover (1) for the EPS module from the original seat.
P
2. Disconnect the electrical connection (1).
RECARO Automotive Seating
I
II
1
1 EPS module cover
K0314
1 Electrical connection
K0315
Page 17