Mounting The Eps Module On The Recaro Seat - RECARO C 6000 Manual Del Usaurio

Q
3. Loosen and remove the two screws (2) (SW 10 adapter).
4. Remove the EPS module (1) from the bracket.

3.9 Mounting the EPS module on the RECARO seat

Warning:
During the installation, ensure that the electrical and pneumatic connections do not become
contaminated or damaged, in order to guarantee a secure contact.
R
4
1. Screw the EPS bracket (2) onto the RECARO seat using two screws (3) – both are included in the
installation kit (T 30 Torx adapter).
Torque:
2. Screw the EPS module (1) onto the EPS bracket with the two original screws (3) using an appropriate
bolt adhesive (SW 10 adapter).
RECARO Automotive Seating
1
3
M8 screws: 25 Nm ± 2 Nm
1 EPS module
2 EPS module screws
1 EPS module
2 EPS bracket – installation kit
3 Screws – installation kit
4 Screws – original seat
2
K0322
Page 18