Cancelling A Programme; Altering A Programme Which Is Running; Altering An Option Which Is Running; Opening The Door After The Programme Has Started - AEG Electrolux LAVAMAT L 60890 Instrucciones Para El Uso

132984631_gb.qxd 14/10/2005

Cancelling a programme

To cancel a programme which is running, turn the programme selector
dial to the RESET O position (ANULACION/PARADA).
Warning! After a programme which ends with water in the drum
(RINSE HOLD option), turn the selector dial first to O and then to the
programme "DESCARGA", "CENTRIFUGADO" or "CENTRIF. DELICADO".

Altering a programme which is running

To modify the selected programme turn the programme selector dial to
O and then choose a new programme.
The water is not emptied out and after pressing the START/PAUSE but-
ton again the machine restarts with the newly selected programme.

Altering an option which is running

To alter an option, first set the machine to PAUSE by pressing the
START/PAUSE button.
Any option can be modified before the machine starts it. After select-
ing the new option press the START/PAUSE button again to re-start the
selected programme.
To modify the selected programme turn the programme selector dial to
O and then choose a new programme.
The water is not emptied out and after pressing the START/PAUSE but-
ton again the machine restarts with the newly selected programme.

Opening the door after the programme has started

To open the door set the machine to PAUSE by pressing the START/PAUSE
button.
The door can be opened if:
• the machine is not already heating;
• the water level is not above the bottom edge of the door;
• the drum is not turning.
The PUERTA light (Door) on the control panel indicates if the door can
be opened:
• green light: the door can be opened;
• red light: the door cannot be opened;
09:50 Pagina 57
Description of the appliance
57