Positioning; Levelling; Water Inlet - AEG Electrolux LAVAMAT L 60890 Instrucciones Para El Uso

132984631_gb.qxd 14/10/2005
You are advised to keep all transit devices so that they can be refitted if the
machine ever has to be transported again.

Positioning

Install the machine on a flat hard floor.
Make sure that air circulation around the machine is not impeded by
carpets, rugs etc.
• Before placing it on small tiles, apply a rubber coating.
• Never try to correct any unevenness in the floor by putting pieces of
wood, cardboard or similar materials under the machine.
• If it is impossible to avoid positioning the machine next to a gas
cooker or coal-burning stove, an insulating panel (85x57 cm) covered
with aluminium foil on the side facing the cooker or stove, must be
inserted between the two appliances;
• The machine must not be installed in rooms where the temperature
can drop below 0.
• The water inlet hose and the drain hose must not be kinked.
• Please ensure that when the appliance is installed, it is easily accessi-
ble for the engineer in the event of a breakdown.

Levelling

Carefully level by screwing the adjustable
feet in or out. Never place cardboard, wood
or similar materials under the machine to
compensate for any unevenness in the
floor.

Water inlet

Connect the water inlet hose to a separate tap with a 3/4" thread.
The other end of
the inlet
which connects to
the machine can
be turned in any
direction. Simply
loosen the fitting,
rotate the hose
and retighten the
fitting, making sure there are no water leaks.
The inlet hose must not be lengthened. If it is too short and you do not
wish to move the tap, you will have to purchase a new, longer hose spe-
cially designed for this type of use.
09:51 Pagina 83
hose
Installation
83