Do not turn the steering wheel sharply when the machine is in motion. The sweeper is very
When the machine is in motion, do not push the directional/speed control pedal all the way forward. This is the same as starting in "High" and will put
1.
Plan your sweeping in advance. Try to arrange long runs with minimum stopping and starting. Sweep debris from narrow aisles (A) out into
main aisle (B) ahead of time. Do an entire fl oor, or section at one time.
2.
Pick up oversize debris before sweeping.
3.
Don't turn steering wheel too sharply when machine is in motion. The machine is very responsive to movement of the steering wheel - so
avoid sudden turns.
4.
Try to follow as straight a path as possible. Avoid bumping into posts or scraping the sides of the machine.
5.
When placing the machine in motion, avoid slamming the directional control pedal all the way forward quickly. This is equivalent to starting
out in "HIGH" and puts needless strain on the engine and drive system.
6.
Always allow the machine to warm up before operating in cold temperatures.
7.
Periodically turn sweeping (main) broom end for end to prevent the bristles from "setting" in one direction.
A-14 - FORM NO. 56041727 - 4366XP
responsive to movement of the steering wheel. Do not make sudden turns.
Sweep in straight paths. Do not bump posts. Do not scrape the sides of the machine.
a strain on the motor and drive system.
Replace sweeping broom when bristles are worn to 3-inch (8-cm.) length.