American-Lincoln 4366XP Instrucciones De Uso página 19

GENERAL MACHINE MAINTENANCE
Perform the following lubrication procedures after every 50 hours of machine use:
1. Lubricate dump system pivot points
hours of machine use.
2. Lubricate drive wheel swivel bearing
3. The steering gear assembly has a grease fi tting, located on the front section of the steering gear housing. Use E.P. Lithium grease to
lubricate the steering gear through the grease fi tting.
4. Lubricate all other moving joints
5. Lubricate the clamp ends of the throttle cable
FIGURE 16
(A), with a good grade multipurpose grease. Do the following lubrication procedures after every 100
(B), and the front wheel bearings (C) with a good multi-purpose grease.
(D) of the machine with #10 oil.
(E) with NAPA #765-1363 or equivalent anti-seize lubricant.
ENGLISH / A-19
FORM NO. 56041727 - 4366XP - A-19