Operation Of Controls And Gauges; Water Temperature Gauge; Hour Meter; Fuel Gauge - American-Lincoln 4366XP Instrucciones De Uso

A-6 / ENGLISH
OPERATIONS OF CONTROLS AND GAUGES
A

Water Temperature Gauge

B

Hour Meter

C

Fuel Gauge

D

Oil Pressure Gauge

E

Volt Meter

F Broom and Fan Switch
G

Shaker Motor Switch

H Right Side Broom Lift
I Wet Sweep Bypass (option)
J

Ignition Switch

K Turn Signal (option)
L

Foot Brake

M

Accelerator and Directional Control Pedal

N Backup Alarm Switch (option)
O

Seat Adjustment

P

Parking Brake

Q

Circuit Breakers

R Hopper Lift
S Hopper Rotate and Dump
T

Throttle Control

U Check Engine Light (Gas/LPG)
V Left Side Broom Lift
W

Main Broom Lift

X

Work Light Switch (option)

Y Light Switch (option)
Z Horn
AA Glow Plug (Diesel)
WATER TEMPERATURE GAUGE (See Figure 2)
The water temperature gauge (A) is located on the instrument panel to the left of the fuel gauge. The gauge is activated by a sender in the
engine. It displays the engine water temperature in °F.
HOUR METER (See Figure 2)
This meter (B) is located to the left of the oil pressure gauge on the instrument console. This meter is activated when the engine begins running.
The meter indicates actual "run" time of the machine. The meter can be used to indicate when maintenance should be done to the machine.
FUEL GAUGE (See Figure 2)
The fuel gauge (C) is located between the water temperature gauge and the volt meter on the instrument panel, and indicates the level of fuel
contained in the fuel tank.
OIL PRESSURE GAUGE (See Figure 2)
The oil pressure gauge (D) is located on the instrument panel to the right of the hour meter. The gauge is mechanical and activated by a sender
in the engine. It displays the engine oil pressure in PSI.
VOLT METER (See Figure 2)
The volt meter (E) is located on the control panel to the left of the fuel gauge. The meter indicates the charging or discharging of the battery.
When the key is in the accessory position the gauge will register approx. 12 volts. The meter will indicate approximately 13 to 14.5 volts when the
engine is running. This indicates that the alternator is working correctly.
A-6 - FORM NO. 56041727 - 4366XP
FIGURE 2