American-Lincoln 4366XP Instrucciones De Uso página 7

ENGLISH / A-7
OPERATIONS OF CONTROLS AND GAUGES
FIGURE 3 FIGURE 4
BROOM & FAN SWITCH (See Figure 2)
The broom and fan switch (F) is located to the left of the right side broom lever. This switch "powers" the brooms and the vacuum fan system. It
has on-off positioning.
SHAKER MOTOR SWITCH (See Figure 2)
The shaker motor switch (G) is located below the broom and fan switch. This is a momentary switch that will activate the fi lter shaker motors.
Hold the switch for 20 to 30 seconds to activate the shaker motors. When the shaker motors have been activated, the brooms and impeller fan
will stop. The shaker motors will only operate with the hopper in the "SWEEP" position. The switch is not on the control panel if the machine is
equipped with the CDC Dust Control Filter Option.
TIMED SHAKER MOTOR SWITCH (OPTION) (See Figure 2)
The shaker motor switch (G) is located below the broom and fan switch. This is a momentary switch that will activate the fi lter shaker motors for
20 to 30 seconds after it has been pushed. When the shaker motors have been activated, the brooms and impeller fan will stop. The shaker
motors will only operate with the hopper in the "SWEEP" position.
HYDRAULIC FLUID SIGHT GLASS (See Figure 3)
The sight glass is located on the side of the hydraulic oil reservoir.
The sight glass indicates the level of the hydraulic oil in the reservoir.
Fluid level must be visible in the sight glass when the hopper is in the down position. If the sight glass is completely full, then there is too much
fl uid in the reservoir.
RIGHT SIDE BROOM LIFT AND POWER CONTROL (See Figure 4)
The right side broom lift (H) and power control is located on the right side of the instrument panel. To raise and stop the side broom, grasp the
lever and push the lever to the locking notch, marked with the "UP" arrow. To lower the side broom, grasp the lever, push it up and to the left,
away from the locking notch. Let the lever lower -until it rests by the "DOWN" arrow. The broom will automatically begin rotating as it is lowered.
To turn "ON" the side brooms, move the Hopper Lift/Side Broom Lever forward to the "ON" position (See Figure 9).
FORM NO. 56041727 - 4366XP - A-7