Audio Setup Page; Speaker Setup; Downmix; Spdif Output - Marantz DV4360 Guia Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 91
AUDIO SETUP
Speaker Setup (picture 6)
Press UP/DOWN CURSOR to select the items in the Speaker
Setup
DOWNMIX (picture 7)
LT/RT or STEREO: If you connect only two speakers, you
should choose these.
5.1CH: When you play a disc with Dolby Digital, you should
choose this best. When you select it, the left menu item CENTER
SPEAKER
and
REAR
CENTER SPEAKER / REAR SPEAKER: The speaker could be
turn large, small or off in their item.
FRONT SPEAKER
The speaker could be turn large or small in its item
SUBWOOFER/ Test Tone:
The speaker could be turn on or off in their item.
SPDIF OUTPUT (picture 8)
Press the LEFT button go back to the Audio Setup Page, then use
up/down to select SPDIF setup.
OFF: the output signal is Analog format, the default setting. You
should select this when you are playing the disc through the
SPDIF OUTPUT Right & Left jacks on your DVD player. No sig-
nal output from the coaxial port when selecting this function.
SPDIF/RAW: Select this when the DVD player is connected with
a power amplifier through DIGITAL OUT coaxial port. The power
amplifier to be connected must have Dolby Digital decoding.
SPDIF/PCM: Select this when the DVD player is connected
with a 2-CHANNEL DIGITAL MODE OR STEREO AMPLIFIER.
When a Dolby Digital or MPEG disc is played, the coaxial port
will output in PCM 2-channel format. These program features
an uncompressed digital stereo sound track for improved fideli-
ty, when played, discrete stereo sound will be heard from the
front right and left speakers.
LPCM OUT (picture 9)
LPCM 48k: In the linear PCM setting,"48K" means "the digital
audio output maximum sampling rate is 48KHz, there-
fore, when the title's encoding sampling rate* is 96KHz,
the output will be forced conversion to 48KHz .
LPCM 96k: If "96k" is selected, then the maximum output sam-
pling rate is 96k and no conversion will take place.
Audio Setup
DYNAMIC: This function allows you to alter the dynamic sound
output. High volume outputs(gunfire, explosions) are softened
enabling you to watch your favorite movie without disturbing
others. (picture 10)
SPEAKER
will
be
selectable.
16
PICTURE 6
PICTURE 7
PICTURE 8
PICTURE 9
PICTURE 10

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido