Sun Enterprise 220R Manual De Instalación Y Montaje página 30

2. To connect an MII transceiver:
a. Connect an MII transceiver to the MII Ethernet connector on the system back
panel.
b. Attach the network AUI cable to the AUI connector on the MII transceiver.
Lock the AUI connector.
Slide the latch to the right to lock the AUI cable to the MII-to-AUI transceiver. Use
a flat-blade screwdriver, if necessary.
c. Connect the other end of the MII transceiver to the appropriate network cable.
en-26 Sun Enterprise 220R Server Setup and Rackmounting Guide • December 1999