Materials And Tools For Installation; Sensor Mounted With Bushing - WEG Motor Scan Manual Del Usuario

Materials and Tools for Installation

1 MATERIALS AND TOOLS FOR INSTALLATION

1.1 SENSOR MOUNTED WITH BUSHING

For the correct installation of the sensor in the asset, the tools and materials indicated in Figure 1.1 on page 4
are required.
Drill Bit 5,9 mm or 15/64"
Sensor Screw M4x20 mm
Drill Hammer Allen Wrench 3 mm
Bushing
Figure 1.1: Tools and materials required to install the sensor on the motor
Installation Manual | 4