Positioning Of The Sensor For Installation; Motor Asset Of Lines W21, W22 And W50 - WEG Motor Scan Manual Del Usuario

Positioning of the Sensor for Installation

2 POSITIONING OF THE SENSOR FOR INSTALLATION
2.1 POSITIONING OF THE SENSOR - APPLICATION: WEG ELECTRIC MOTOR ASSET
OF LINES W21, W22 AND W50
As shown in Figure 2.1 on page 6, the sensor should be installed at a maximum distance D = 20 mm from
the center of the motor and at a distance M from the top of the fin. The distance M varies according to the
motor line and frame, and it is indicated in Table 2.1 on page 7.
D
Figure 2.1: Distances D and M to mount the sensor
In Figure 2.2 on page 6, see the fixation of the sensor on a motor of W22 line.
Figure 2.2: Sensor mounted on the motor W22
Installation Manual | 6