Black Max BMi1000 Manual Del Operador página 21

DRAINING THE CARBURETOR
 Loosen the screw at the top of the engine maintenance
cover. Remove cover and set aside.
 Put the on/off switch/fuel valve in the OFF (O) position.
 Position a suitable container under the carburetor drain
screw to catch fuel; loosen the screw.
 Allow fuel to drain completely into container.
 Retighten drain screw securely.
 Replace the engine maintenance cover and reinstall the
screw to secure.
NOTE: Consult hazardous waste management guidelines in
your area for the proper way to dispose of used fuel.
STORAGE
When preparing the generator for storage, allow the unit to cool for 30 minutes then follow the guidelines below.
STORAGE TIME
Less than 2 months  Drain gasoline from tank and dispose of in a suitable container according to state and local
2 months to 1 year  Drain fuel from carburetor.
 Drain gasoline from tank and dispose of in a suitable container according to state and local
1 year or more  Drain fuel from the carburetor.
 Remove spark plug.
 Drain gasoline from tank and dispose of in a suitable container according to state and local
 Put a tablespoon of engine lubricant into the spark plug cylinder. Turn the engine slowly with the
 Reinstall spark plug.
 Change engine lubricant.
After removal from storage:
 Fill with fresh gasoline.
NOTE: If storing gasoline in suitable container for later use, make sure gasoline has been treated with fuel sta-
bilizer according to stabilizer manufacturer's instructions.
All manuals and user guides at all-guides.com
MAINTENANCE
ordinances.
ordinances.
ordinances.
pull rope to distribute the lubricant.
Page 17 — English
TRANSPORTING
 Put the on/off switch in the OFF (O) position.
 Close the vent on the fuel cap by rotating the fuel cap
lever to the OFF (O) position.
 Allow 30 minutes of "cool down" time before transporting
the machine. Make sure engine and exhaust of unit are
cool.
 If transporting in a vehicle, drain the fuel tank, and
securely restrain the generator.
 Do not drop or strike unit or place under heavy objects.
 Provide a plastic sheet or absorbent pad below the gen-
erator to catch any drips of fuel or lubricant.
PRIOR TO STORING