Bernina Q 20 Instrucciones De Montaje página 24

English
39
K K
L L
Secure the back machine mounting bracket (K) by inserting the machine
mounting bolt (L) into the internal machine base mounting bracket. Secu-
re, but do not tighten fully until after the base mounting bracket has been
positioned with the base mounting bracket bolts (J).
41
J
Q
Secure the back base mounting bracket by tightening both the base moun-
ting bracket bolts (J) with the nut driver (Q).
43
M
Attach the back machine mounting bracket (N) to the machine using the
hex screws removed from the machine.
24
N
40
Insert the machine mounting bolt into the internal machine base mounting
bracket. Secure, but do not tighten fully until after the base mounting bra-
cket has been positioned with the base mounting bracket bolts.
42
R
With the hex driver (R) remove the bottom left and right hex screws (M)
from the machine base.
44
Secure the back machine mounting bracket (N) by tightening the hex screws
(M).
M