Auto Power Off; Important; Config Operation Mode - Promax 26 Manual De Instrucciones

d) BEEP
This function permits to activate (ON) or deactivate (OFF) the PROMAX-26 beeper.
When it is on, it sounds on pressing any key in order to alert the user.
e) AUTO POWER OFF
This field permits to activate (ON) or deactivate (OFF) the POWER-OFF function.
When this function is ON, the unit automatically turns off when it has remained
inactive for a period of 10 minutes.
The lower part of the screen displays the battery charge level (BATTERY)
expressed in hours (12.21 in the prior figure) and the program version (FIRMWARE)
of the control device (1.02 6001) and the serial number (00000002).
To exit the internal function configuration menu and return to the main menu,
press the BACK option from the lower selection box, or the direct main menu
access button [13].

4.2.2 CONFIG operation mode

This menu allows users to define all of the parameters necessary to make
measurements of analogue and digital TV as well as the data analyse for upstream and
downstream link or to register on the data network as an active DOCSIS/EuroDOCSIS
system.
To access them, use the navigation buttons [7] to move the selector, and once
the field you want to modify is marked, press the select button. Then it will be possible
to use the select buttons or alphanumeric keypad to modify their value. Lastly, press the
new selection button to validate the new value.
Figure 6. - Cable modem configuration menu.
Page 20
USER'S MANUAL. PROMAX-26

IMPORTANT

02/2007